Air Cross or Cross Flow Brazed PHE
Brazed PHE Condenser
Brazed PHE Oil Cooler
Brazed PHE Air Dryer
Brazed PHE Evaporator
Liquid to Liquid Brazed PHE
Nickel Brazed PHE
Liquid to Liquid Brazed PHE
BL50C
BL20
BL26
BL95
BL120
BL190
BL200
BL26C
BL600
Liquid to liquid Brazed PHE BL14
 

BL26


Detailed Product Description:

AISI 316 SS Brazed Copper Plate Heat Exchangers for Marine Oil Cooler
Working principles
The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.
 
Standard design
The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.
 
Standard materials
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 316
Plates: Stainless steel AISI 316
Brazing material: Copper
 
Particulars required for quotation
To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:
– flow rates or heat load required
– temperature program
– physical properties of liquids in question
– desired working pressure

– maximum permitted pressure drop

Advantages of brazed plate heat exchangers in Industry and HVAC&R

  • The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications.
  • The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.
  • The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.
  • The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short delivery time.

     
    Refrigeration Systems :
    Evaporator
    Condenser
    Economizers and Desuperheaters
    Air dryer
    Heat pump
    Absorption chiller
     
    HVAC
    Radiant Floor
    Snow Melt
    Boiler and Solar water heat exchanger
    District heating
     
    Other Industrial applications such as:
    Heat Recovery and Oil Cooler: hydraulic oil cooling, engine oil cooling, and fuel oil heating.
    Steam Heating.
    Flat plate heat exchanger
    Beer wort cooler
    Milk pasteurization
    Wind turbine oil cooler
    Marine oil cooler


    Short delivery time.
    High quality
    Reasonable price
    Customer made
    Know-how design and customer support

Width

Height

Horizontal
port 
distance

Vertical 
port 
distance

Thickness

Max Plates

Max flowrate 
(M3/h)

Weight  (kg)

Heat 
exchange 
area (m2)

Volume L

111

310

50

250

10+2.36N

100

18

1.3+0.12N

0.026 (N-2)

0.025 (N-2)



Products
Brazed Plate Heat Exchanger
Gasket Plate Heat Exchanger
Gasket PHE Spares
Heating Insulation
PHE Application
PHE Application Other
PHE Application Solar
PHE Application
PHE Application General Industry
PHE Installation
Installation Manual


Trucking company tracking