Gasket PHE Steam Heater
Liquid to Liquid Gasket PHE
Sanitary PHE for Food
Liquid to Liquid Gasket PHE
Energy Efficient Gasket Plate Heat Exchanger for Food Industry
Energy Efficient Gasket Plate Heat Exchanger 300KW
300KW
Gasket Plate Heat Exchanger 300 to 800 kW 16 kg
Efficient Heat Transfer Gasket Plate Heat Exchanger 300
300
Gasket Plate Heat Exchanger High Heat Transfer Efficiency 300
High Heat Transfer Efficiency Gasket Plate Heat Exchanger 300
Steem Heat Gasket Plate Heat Exchangers High Heat Transfer Efficiency 300
Energy Efficient Gasket Plate Heat Exchanger 300

High Heat Transfer Efficiency Gasket Plate Heat Exchanger 300 - 800 kW 16 kg/s (250 gpm)

Detailed Product Description

High Heat Transfer Efficiency Gasket Plate Heat Exchanger 300 - 800 kW 16 kg/s (250 gpm)

Standard design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.

Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

   Typical capacities

  • Liquid flow rate
  • Up to 16 kg/s (250 gpm), depending on media, permitted
  • Pressure drop and temperature program.
  • Water heating by steam
  • 300 to 800 kW
     

Applications
General heating and cooling duties. Heating by means of steam.

 

Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Food industry: Milk pasteurization Milk and beverage pasteurization , Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place) heating , Reverse osmosis water.
 
Marine application : Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers’ cabins and freight spaces
 
Others:  turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating,  

  • Short delivery time.
  • High quality
  • Reasonable price
  • Customer made
  • Know-how design and customer support

Model

BS60H

Cross Reference ALFA LAVAL

TS6M

Height,  H [mm]

704

704

Width,  W [mm]

400

410

Min standard length,  L [mm]

530

540

Max standard length,  L [mm]

1430

1440

Vertical port distance,  VC [mm]

380

380

Horizontal port distance,  HC [mm]

203

203

Max temperature [°C]

180

180

Max pressure [barg]

16

20.6

Flange size

DN65/2”

DN65/2”

Max. flow rate [kg/s]

20


Products
Brazed Plate Heat Exchanger
Gasket Plate Heat Exchanger
Gasket PHE Spares
Heating Insulation
PHE Application
PHE Application Other
PHE Application Solar
PHE Application
PHE Application General Industry
PHE Installation
Installation Manual


Trucking company tracking